Thursday, December 14, 2006

What is the difference between DJ Console MK2 PC and Mac?


There is no hardware difference, both DJ Console MK2 are the same.
The difference is only the DJ software:

  • DJ Console MK2 PC comes with Virtual DJ 3 DJC Edition,
  • DJ Console MK2 Mac comes with Traktor 3 LE.
If you have a DJ Console MK2 PC and want to use it in Mac OS 10.4, you just need to have a Mac DJ Software and to download DJ Console MK2 Mac drivers.

Friday, December 1, 2006

Monday, September 25, 2006

DJ Console MK2 released for Mac

One year after the release of DJ Console MK2 for PC, Hercules releases its DJ Console MK2 Mac Edition, with Native Instruments Traktor 3 LE software.
Compared to the previous DJ Console Mac, base on DJ Console MK1, DJ Console MK2 Mac Edition has not only a new cosmetic, but also new audio features as 2 stereo audio inputs, so that in addition to mixing your MP3 files on your computer, you connect vinyl turntables or CD players to DJ Console MK2 audio inputs.
DJ Console MK2 for Mac offers hybrid mixing in merging analogue and digital audio in the same mix, since you can:
- set the gain on analogue inputs sound in Traktor 3 LE to set a similar level for external sources and MP3 files,
- set the volume on analogue inputs with DJ Console MK2 volume fader,
- equalize analogue inputs via with DJ Console MK2 EQ buttons
- mix analogue inputs with MP3 files on DJ Console MK2 crossfader.

DJ Console MK2 Mac Edition is compatible with Mac OS 10.4 on both G4/G5 and also Mac Intel based Mac computers.

Tuesday, September 19, 2006

How can I preview my music with DJ Control MP3?

DJ Control MP3 is a DJ mix controller without audio, so you need a 4-channel or 5.1-channel sound card to preview your music.

In VirtualDJ DJC Edition PC
- you get the mix on output 1/2 (front left/front right),
- you get the preview on output 5/6 (surround left/surround right),
then you preview a deck when you push down the monitor button of the relevant deck on DJ Control MP3 (the button with a headphone logo) AND YOU KEEP THE PREVIEW BUTTON PUSHED DOWN, since the preview stops as soon as you release the preview buttons.

If you don’t hear any sound in the output 5/6:
1) Make sure you have enabled the output 5-6: click on Start > Settings > Control Panel > Sounds and Audio devices > Volume : Speaker Settings : Advanced Settings > 5.1 Surround Speakers. If your setting for speakers is stereo, you cannot get a sound in the output 5-6.
2) Make sure your headphones have a low impedance (32 ohms or less) since standard sound output on 5-6 has a line level, a level not strong enough to playback sound on high impedance headphones, so you can use 200 or 600 ohms headphones only with headphones preamplifier.

How can I suppress the background sound of the preview in the mix output and vice-versa?

You should not hear the sound of the preview in your mix or vice versa, so if you hear it, a 3D virtualisation effect is positioning the sound in your multi-channel sound card. You must disable the 3D positioning in your sound card control panel.

Tuesday, September 12, 2006

Is DJ Control MP3 compatible with Mac OS?

Yes, DJ Control MP3 is compatible with Mac OS 10.3 and 10.4 if you download the drivers on Hercules website.
But there is no DJ software compatible with Mac OS in DJ Control MP3 box, so you need to have your own DJ software for Mac OS as Traktor or MegaSeg.

Thursday, June 29, 2006

Which headphones can fit with DJ Console MK2?

Headphones recommended for DJing have:
- a low impedance, from 16 to 64 Ohms, to keep the sound punchy especially on bass (high impedance headphones tend to be less punchy),
- with a high sensitivity (100 dB or more),
- isolating ear cups attenuating the ambient noise,
- comfortable soft ear cushions (you must bear the headphones for hours),
- a long cable (10 feet),
- a stereo jack 1/4" plug, or a jack 1/8" plug with a 1/4" adapter,
- preferably foldable earphones, to allows double or single ear monitoring.

Never use in-ear earphones: they are not appropriate for DJing, too difficult to remove, not protective enough from the ambient noise, and not comfortable enough.

You can use other headphones with DJ Console MK2, as hi-fi headphones over 100 ohms, but with headphones the higher the impedance the lower the volume in the headphones, so while high impedance headphones can be OK for bedroom DJing, their volume may be too low to cover the sound and screams of the audience in a party. 

Tuesday, June 6, 2006

DJ Control MP3 in "24"

In "24", Season 5, Episode 22, DJ Control MP3 makes a short appearance.








OK, there is no DJ mix in this episode, simply the playback of an MP3 file.

Sunday, May 14, 2006

How can I repair my DJ Console MK1 to get a better response on the Play and Cue buttons?

DJ Console MK1 Play and Cue buttons response decrease with the time because the contact dots on the printed circuit board activated by the buttons become rusty when the console is not stored in a dry atmosphere.
You can improve the response by cleaning the contact areas of the printed circuit board:

  1. Remove the caps of the equalization and volume buttons,
  2. Disassemble DJ Console MK1 in removing the screws placed on the ground side below the red feet,
  3. Unscrew the printed circuit board to remove the top case,
  4. Remove the 2 keypads with the Play and Cue buttons, clean with non abrasive solvent (typically white spirit) the black contact dots on rear of this keypads: don’t brush heavily, these carbon contacts must remain black to make a contact on the printed circuit board. You just have to remove possible rust from these black dots.
  5. Also clean with white spirit the contact areas of the printed circuit board.
  6. Reassemble everything.

In the future, store your DJ Console MK1 in a dry atmosphere to avoid rust (if you must store it in a cellar or a garage, place it in a closed plastic bag).

This Play and Cue buttons issue doesn’t occur on DJ Console MK2 and DJ Control MP3 since:
  • there are 4 contact dots below each Play and Cue dots on DJ Console MK2 and DJ Control MP3, versus 2 contact dots on DJ Console MK1,
  • DJ Console MK2 and DJ Control MP3 printed circuit boards have received a protection against rust.

Wednesday, April 19, 2006

Tuesday, February 28, 2006

Monday, February 27, 2006

DJ Control MP3 in The Guardian

The Guardian makes a short description of DJ Control MP3.

Wednesday, February 8, 2006

Thursday, February 2, 2006

DJ Console MK2 in DanceVibes.be

DanceVibes.be has reviewed DJ Console MK2.

Monday, January 30, 2006

Thursday, January 26, 2006

Mac OS X drivers released for DJ Control MP3

http://ts.hercules.com/eng/index.php?pg=view_files&gid=2&fid=28&pid=179&cid=1

DJ Control MP3 drivers for Mac make it possible to use DJ Control MP3 as a MIDI controller in Mac OS 10.3 (Panther) and Mac OS 10.4 (Tiger).

DJ Control MP3 includes no software bundle for Mac, so it is not a complete solution to mix on Mac, but Mac owners who already have Mac DJ software with a MIDI learning mode as Traktor 2.5 or 3.0 full version can now control this software.
Traktor 2.5 DJ Console Edition Mac is not supported by DJ Control MP3.

Friday, January 20, 2006

New drivers for DJ Console 1 in drivers package 1.CMK2.2006

http://ts.hercules.com/eng/index.php?pg=view_files&gid=2&fid=28&pid=143&cid=1

This driver package unifies drivers for DJ Console 1 and DJ Console MK2.
The new drivers for DJ Console 1 keep DJ Console 1 control panel, but change the ASIO engine for better stability.
These drivers are for Windows XP only.

New Control Panel for DJ Console MK2 in drivers package 1.CMK2.2006

http://ts.hercules.com/eng/index.php?pg=view_files&gid=2&fid=28&pid=177&cid=1

Hercules has released a new control panel for DJ Console MK2, to simplify the settings of DJ Console MK2.
All panels let the DJ
- Set the balance and the volume on output ½ and ¾
- Select the audio sources as being the computer or external audio sources
- Lock the audio source selection
- Choose the recording source on input 1 / 2 between line in and microphone in

Main Panel


The main panel lets the DJ:
- Set a talk-over attenuation (-3dB, -6dB or -9dB)
- See whether the microphone input is on air
- See the headphones mode
- Select the audio Mode as WDM or ASIO

ASIO Panel

In case the DJ selects ASIO as Audio Mode, the additional options are:
- sampling rate (44100Hz or 48000Hz)
- sampling step (16-bit or 24-bit)
- buffer size (steps stored in cache memory: at 44100Hz, 441 as buffer size means 441/44100 = 0.01s, a 10 ms buffer)
If the sampling step is 24-bit, the input channel 3/4 is not available.

Advanced Panel

The advanced panel proposes additional options for advanced users:
- use an external mixer
- lock the cross fader (if you plug DJ Console MK2 in a mixer, you use the mixer cross fader)
- change the cross fader curve
- activate the mushroom in mouse mode
These options are for other software than VirtualDJ (VDJ integrates directly such options).

About Panel

The “About” panel lets you read the drivers and firmware version.